Digital Sine Wave Inverter IVT DSW-2000, 24 V, 2000 W

Zoom image

Important characteristics and features:

True sine wave voltage 230 V / 50 Hz
Peak power output 600 W
Galvanic isolation
Standby and sleep function
Dynamic deep discharge protection
Powerstart function for consumers with high inrush current
Performance and temperature controlled fans
Overvoltage cut-off
Country specific outlet sockets on request

908,43 EUR

19 % VAT incl.

Product no.: 430108
EAN: 4030072431088

Information for resellers
Become a distributor now

Absolutely autarchic thanks to true sine wave alternating voltage.

Digital Sine Wave Inverters of the DSW series offer an independent energy supply wherever it is needed: on the go or stationary, as single unit or in combination with alternative energy sources such as solar or wind power. As they convert reliably and precisely an input voltage of 12 V respectively 24 V into a true sine wave alternating voltage of 230 V/50 Hz. Even sensitive electrical consumers such as measuring devices, pumps or machines with electronic regulation, TV sets, monitors and many others can be supplied safely with power independently from the public mains net.

Our inverters offer a power spectrum between 300-2000 W continuous power and respectively a double as high peak output power. Should this not be sufficient, you have the possibility to switch 2 DSW-2000-Synchron devices in parallel.
Thus, a continuous power of 4000 W is achieved.

The inverters of the DSW series and the solar controllers of the MPPTplus⁺ series are perfectly attuned to each other. With only one remote control (cable-connected version FB-04 or radio-controlled version FB-05) as well as with the Webbox-LCD the devices can be controlled and monitored individually.

The most important characteristics and features:

Input voltage: 12 V or 24 V DC
Output voltage: true sine wave alternating voltage 230 V/50 Hz
Extensive power range: continuous output power from
300 W to 4000 W
Double as high peak output power
Particularly safe: galvanic isolation of the input
and output stages

Further characteristics:

Standardly equipped with overvoltage shut-off,
overload management, short circuit shut-off and
protective overheating switch
Energy-saving standby function
Dynamic deep discharge protection
Power start function for electrical consumers
with high inrush current
Suitable for permanent mounting inside commercial
vehicles thanks to the E-mark certification
Monitoring and controlling of the DSW inverters and of the
MPPTplus⁺ solar controllers with only one remote control
(FB-04/FB-05) or from everywhere via PC by virtue of the
Webbox-LCD
5 V USB terminal
Temperature range -25 °C to +60 °C
Sturdy metal housing


Techncal data		Digital Sine Wave Inverter DSW-2000, 24 V
Input
Rated voltage		24 V
Voltage range DC		22 - 32 V
Rated input current		100 A
Input current max.		124 A
Deep discharge protection voltage, idle		21 V
Deep discharge protection voltage, rated power		19 V
Deep discharge protection voltage, adjustable*		18 V - 24 V
Pre-warning deep discharge shut-off		1 V above shut-off voltage
Reactivation voltage		25 V
Shut-off overvoltage		32 V
Rated power, idle		10 W
Rated power, standby		0,4 W
Output
Output voltage AC (+-2 %)		230 V_eff
Frequency (+-1 %)		50 Hz
Signal characteristic		Sinus
Continuous output current		8,7 A_eff
Continuous output power		2000 VA
Peak output power (max. 2 s)		4000 VA
Power factor		cos phi > 0,8
Rated efficiency		90 %
Standby activation, output power		< 50 VA
General
Output terminal		shockproof socket
Output terminal USB (Typ A)		5 V/500 mA DC
Temperature range (66 % rated power) Temperature range (100 % rated power)		- 25 °C to + 60 °C - 25 °C to + 40 °C
Sleep-function		selectable
Standby function		selectable
Galvanic isolation (in-/output)		yes
Power start function		yes
E-mark certification		yes
Remote controllable		yes
Manufacturer warranty		3 years
Dimensions (L x W x H)		391 x 334 x 88 mm
Weight		6.5 kg

*Only with FB-04 or Webbox

Delivery content:

Digital sine wave inverter IVT DSW-2000, 24 V
Operating instructions DE, EN, FR, NL

Please order connection cable separately.

Downloads:

Brochure Digital Sinusoidal AC inverters

Operating instructions
DSW-2000/24 V

Declaration of Conformity

Download PDF Version »

Browse online now »

Recommended products:

Connection Cable IVT 1 m 35 mm<sup>2</sup> for DSW-Inverters 2000 W

Connection Cable IVT 1 m 35 mm² for DSW-Inverters 2000 W

• Conductor cross-section: 35 mm²
• Cable length: 1 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 431004

62,12 EUR (19 % VAT incl.)

Connection Cable IVT 2 m 35 mm<sup>2</sup> for DSW-Inverters 2000 W

Connection Cable IVT 2 m 35 mm² for DSW-Inverters 2000 W

• Conductor cross-section: 35 mm²
• Cable length: 2 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 431005

74,23 EUR (19 % VAT incl.)

Connection Cable IVT 3 m 35 mm<sup>2</sup> for DSW-Inverters 2000 W

Connection Cable IVT 3 m 35 mm² for DSW-Inverters 2000 W

• Conductor cross-section 35 mm²
• Cable length: 1 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 431006

98,04 EUR (19 % VAT incl.)

Connection Cable IVT 1 m 50 mm<sup>2</sup> for DSW-Inverters 2000 W

Connection Cable IVT 1 m 50 mm² for DSW-Inverters 2000 W

• Conductor cross-section: 50 mm²
• Cable length: 1 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 431010

74,03 EUR (19 % VAT incl.)

Connection Cable IVT 2 m 50 mm<sup>2</sup> for DSW-Inverters 2000 W

Connection Cable IVT 2 m 50 mm² for DSW-Inverters 2000 W

• Conductor cross-section: 50 mm²
• Cable length: 2 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 431011

97,97 EUR (19 % VAT incl.)

Connection Cable IVT 3 m 50 mm<sup>2</sup> for DSW-Inverters 2000 W

Connection Cable IVT 3 m 50 mm² for DSW-Inverters 2000 W

• Conductor cross-section: 50 mm²
• Cable length: 3 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 431008

133,63 EUR (19 % VAT incl.)

Connection Cable IVT 4 m 50 mm<sup>2</sup> for DSW-Inverters DSW-1200 12/24 V, DSW-2000 12/24 V, DSW-2000-Synchron 12 V

Connection Cable IVT 4 m 50 mm² for DSW-Inverters DSW-1200 12/24 V, DSW-2000 12/24 V, DSW-2000-Synchron 12 V

• Conductor cross-section: 50 mm²
• Cable length: 4 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Art.Nr.: 430054

177,73 EUR (19 % VAT incl.)

Remote on/off switch IVT FS-01, mounted version

Comfortable switch on/off of DSW inverter
Surface mounting
With LED indicator

Art.Nr.: 430111

22,21 EUR (19 % VAT incl.)

Remote on/off switch IVT FS-02, installation version

Comfortable switching on/off all DSW-Inverter
Installation Version
With LED indicators

Art.Nr.: 430121

33,33 EUR (19 % VAT incl.)

Remote Control Touchscreen IVT FB-04, cable-connected

• Suitable for MPPTplus⁺ solar controller
• Suitable for digital sine wave inverters
• Management of the most important parameters
• Permanent surveillance of the system
• Data storage on SD card possible

Art.Nr.: 200051

198,00 EUR (19 % VAT incl.)

Webbox-LCD IVT for DSW Inverters and MPPT<i>plus</i><sup>+</sup> Solar Controllers

Webbox-LCD IVT for DSW Inverters and MPPTplus⁺ Solar Controllers

Suitable for Digital Sine Wave Inverter series
Suitable for MPPTplus⁺ Solar Controller series
Permanent surveillance of the solar systemís live data
Long term evaluation of the solar performance
Automatic assignment of the IP address
Data storage on internal memory
No additional PC software required

Art.Nr.: 200054

143,55 EUR (19 % VAT incl.)

Vibration Damper Set for DSW-inverters

• Protects against shocks and vibrations
• Natural rubber
• M6
• Incl. 8 self-locking nuts and 8 washers

Art.Nr.: 430117

17,10 EUR (19 % VAT incl.)

Switching Station IVT US-16, 230 V AC, 16 A, 3600 VA

• Suitable for sine wave inverters up to max. 3600 VA
• Microprocessor controlled priority switching
• Switches reliably between two 230 V AC power sources
• Precise switching thanks to high quality relays
• Protected against overload and short circuit
• Housing protection type IP 55

Art.Nr.: 400034

104,85 EUR (19 % VAT incl.)

Switching Station IVT US-12N

• Suitable for sine wave inverters up to max. 2700 VA
• Microprocessor controlled priority switching
• Switches reliably between two 230 V AC power sources
• Precise switching thanks to high quality relays
• Protected against overload and short circuit
• Housing protection type IP 55

Art.Nr.: 400033

85,07 EUR (19 % VAT incl.)

Power distribution box IVT BNV-3 for inverters

• 3 x residual current protective device (RCD) 30 mA
• 3 x Schuko^® socket with hinged cover
• Rubber connection cable with Schuko^® plug
• High-quality plastic housing
• Protected against splash water according to IP 44
• Fully assembled, equipped and tested

Art.Nr.: 430056

383,53 EUR (19 % VAT incl.)

Leakage Protector EverFlourish EMP200S-1

• Effective protection against leakage currents
• Interrupts power supply < 30 ms
• Suitable for loads up to 3,600 W
• Splash-proof housing IP 44
• Temperature range -25 °C to +40 °C
• Safety check function
• Child safety

Art.Nr.: 2.0645

22,24 EUR (19 % VAT incl.)

This product is compatible with:

Connection Cable 2.70 m 50 mm<sup>2</sup> for DSW Inverters <br>1200 W 12 V/24 V, 2000 W 12 V/24 V/Synchron 12 V

Connection Cable 2.70 m 50 mm² for DSW Inverters
1200 W 12 V/24 V, 2000 W 12 V/24 V/Synchron 12 V

• Conductor cross-section: 50 mm²
• Cable length: 2.70 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Special Price!
Only while stocks last.

56,50 EUR (19 % VAT incl.)

Connection Cable 3.10 m 50 mm<sup>2</sup> for DSW Inverters <br> 1200 W 12 V/24 V, 2000 W 12 V/24 V/Synchron 12 V

Connection Cable 3.10 m 50 mm² for DSW Inverters
1200 W 12 V/24 V, 2000 W 12 V/24 V/Synchron 12 V

• Conductor cross-section: 50 mm²
• Cable length: 3.10 m
• Preassembled with cable end sleeves and eyelet rings
• Color-coded cable ends
• Including fuse holder with 200 A fuse

Special Price!
Only while stocks last.

62,20 EUR (19 % VAT incl.)

Search:

Advanced search

Categories