Power Station IVT PS-300 with integrated sine wave inverter
Zoom image |
Important characteristics and features:
• Pure sine wave alternating voltage 230 V/50 Hz
442,89 EUR 19 % VAT incl. Product no.: 430100EAN: 4030072401111 |
|
![]() |
Electricity to take away - Power to go.
Pure sine wave AC voltage on the go
The PS-300 Mobile Power Station provides you with an independent power supply wherever you need it: at leisure, at work, at camping or in the Tiny House. No matter whether you want to operate 12 V or 230 V devices on the road, with this Power Station you are well prepared for every situation. Because the PS-300 has a 12 V DC and 230 V AC output. Both can be used simultaneously or separately.
The integrated 300 W sine wave inverter provides a true sine wave voltage. The Power Station guarantees that your sensitive consumers are operated trouble-free and safely. For example, you can always and everywhere use your laptop, set up a satellite, TV or music system, carry out minor repairs with power tools or, with the help of a spotlight, complete the final work despite the darkness.
The start of consumers up to max. 600 W with high inrush current is supported by the power start function of the integrated inverter. This makes it possible on the road with a mobile cooling device for chilled drinks on trips.
The high-quality AGM battery 12 V / 20 Ah can be recharged via the 230 V mains or in the vehicle with 12 V. Two LEDs individually indicate the current status of the Power Station. The PS-300 is short-circuit proof and protected against deep discharge and overload.
The most important characteristics and features:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The operating time of the PS-300 Power Station can vary widely depending on which loads are connected. For a fully charged battery, it will last approximately 30 minutes at 300 W (230 V AC output) or approximately 85 minutes at 10 A (12 V DC output). If you operate consumers with lower power, the operating time is extended accordingly. If you use both outputs at the same time, it shortens accordingly.
|
|
|
|
|
|
|
|
• 12 V car charger • Operation instructions in DE, GB, FR, NL
|
Technical data |
Power Station PS-300 |
||
|
|||
Output | 12 V car socket | ||
Output current max. | 10 A | ||
Run time max. | 85 min. at 10 A and full battery charge | ||
Idle current | 4 mA (with active output) | ||
Deep discharge protection | yes | ||
Fuse | T 10 A (accessible from the outside) | ||
230 V AC output |
|||
Output connector | shock-proof socket | ||
Output voltage | 225 V AC (- 8 % / + 5 %) | ||
Frequency | 50 Hz | ||
Waveform | Pure sine wave | ||
Continuous output current | 1,4 Aeff | ||
Continuous output power | 300 VA | ||
Peak output power | 600 VA | ||
Power factor | cos phi > 0,8 | ||
Run time max. | 30 min. at 300 VA and full battery charge | ||
No-load current | 15 mA (with active output) | ||
Deep discharge protection | yes | ||
Overload shutdown | yes | ||
General |
|||
Battery type | AGM battery, 12 V, 20 Ah | ||
Charge via power supply | Battery Trainer Pb (100 – 240 V AC, 50/60 Hz), max. 1.5 A |
||
Charge via 12 V car adapter | 12 – 14.4 V DC, max. 5 A | ||
Dimension (L x W x H) | 240 x 145 x 215 mm | ||
Weight | 10.4 kg | ||
Downloads:
|
|
|
Brochure Digital Sinusoidal AC inverters
|
Instruction Manual
|
|
Download PDF Version » | Download PDF Version » |
Browse online now » |
Recommended products:
![]() |
AGM battery 12 V, 20 Ah
• Suitable for Power Station PS 300 Art.Nr.: 1.3128 79,69 EUR (19 % VAT incl.) |
![]() |
LiFePOâ‚„-Battery 12 V/20 Ah VISION VISLFP1220
Art.Nr.: 920023 390,63 EUR (19 % VAT incl.) |
![]() |
12 V car charging adapter
Art.Nr.: 1.4305 6,68 EUR ( VAT excl.) |