LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm

LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm

Zoom image
Important characteristics and features:


• 3 W Cree LED (225 lm)
• 2,200 mAh Li-ion battery
• Runtime of up to 9 hours
• Lightrange up to 150 m
• 2 levels of brightness
• 128° swiveling lamp head
• Emergency light function
• Robust housing with IP 54
• Magnetic lamp base
• Metal fastening clip
• Weighs only 276 gand is 176 mm high

 

89,00 EUR

19 % VAT incl.

Product no.: 553000
EAN: 4030072553001

LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm

 

                

 

 
Versatile battery light for workshop, construction site and industry –
Handy, robust and bright, with magnet and sturdy fastening clip


whether in public buildings, hospitals, care facilities and nursing homes, in private or commercial use – this compact LED hand lamp convinces with its sophisticated design and numerous technical details:

The daylight white 3 W Cree high-performance LED guarantees bright light, while the powerful Li-ion battery lasts up to 9 hours. Overcharge and deep discharge protection ensure a long service life of the maintenance-free Li-ion battery. 

The swiveling lamp head allows the targeted alignment of the light cone. 2 levels of brightness ensure that the required light is always available. The lamp is protected against dust and splash water (IP 54) and can therefore be used indoors and outdoors.

Thanks to its integrated magnet, the work lamp adheres to any magnetic surface during maintenance and repair work. A robust fastening clip allows the lamp to be attached to work clothing, breast pocket, smock pocket, belt, etc., so that it is always within easy reach.

In addition, the SH-5.300 is equipped with an emergency light function. In the event of a power failure, the rechargeable battery lamp becomes a reliable emergency and safety lighting in rooms, corridors and stairwells, especially in areas without windows or emergency power supply.


Due to its versatility, this handy battery lamp has the potential to become your favorite lamp.

 

 

The most important characteristics and features:
 

 High-performance LED with 225 lm – 2 levels of brightness                

 

The hand lamp is equipped with a powerful 3 W Cree high-power LED. In the maximum brightness level, the luminaire provides 4.5 hours of daylight white (6,500 K) light. The luminous flux in this mode is 225 lm. In dimmed mode, a peak duration of 9 hours is achieved.

Mode Function   Beam angle Luminosity Runtime Lighting range
1 Focus light 15° 100 %     4.5 h ca. 150 m
2 Focus light 15°   50 %   9.0 h ca.   75 m

 
 

 

 128° swiveling lamp head          

 

Thanks to the swiveling lamp head one can precisely direct
the light beam of the SH-5.300 at the desired work area.

The angle of inclination ads up to 128°:
60° forwards, 68° backwards.

 

 

 Magnetic lamp base                      

 

 


 

The magnetic base holds reliably on magnetic surfaces – ideal if you need both hands to work in a confined space. The swiveling lamp head allows the alignment of the light cone on the desired work surface.

With only 276 g, a height of only 176 mm and its numerous application possibilities, this battery lamp is the ideal companion for many uses.


 

 

 Stable metal fastening clip

 
   

 
     



On the back of the lamp is a sturdy metal clip for attaching to work clothing, tool belts or equipment. Thanks to this, the clip lamp can be carried around comfortably – so you always have both hands free for your work.

With the help of the swivelling lamp head, the light beam of the emergency light can be directed exactly in the direction of view or to the area you want.

In addition, the fastening clip also helps to securely fix the hand lamp in the wall/car mount.


 

 

 Large push-button switch – with charging status indicators                      

 

    

 

 

The SH-5.300 is perfectly matched to the professional work routine. The rubberized push-button switch can be safely and easily operated even with gloves.

In addition, 3 LEDs below the switch provide you with information about the charging state of the battery at any time.

 

 

 

 

 

 Charging cradle with visual charge control indicator                        

 


   

The SH-5.300 can be safely stored and charged in the charging cradle.
A 230 V plug-in power unit and a 12/24 V car charging adapter are included.

During charging, depending on the charging state of the battery,
the red, yellow and/or green LED lights up. Once the battery is fully charged,
all three LEDs will light up. Because of overcharge protection, the luminaire can
remain permanently connected to the mains.

 

 

 Powerful Li-ion battery with 2,200 mAh        

 

The hand lamp SH-5.300 is equipped with a high quality 2,200 mAh Li-ion battery.
With a runtime of 9 h at half power and 4.5 h at full power, you can cover almost a full working day with just one battery charge.

The Li-ion battery achieves this reliably stable power through its high energy density. It guarantees you a long service life and also minimizes its weight.
 
 

    Advantages of Li-ion battery technology
 
    • High energy density
    • Maintenance-free
    • No memory effect
    • Low self-discharge
   
• Lightweight           
• Powerful
• Durable

 

 

 

 Robust housing – dust and splash-proof IP 54                        

 

 

 

The housing is dust and splash-proof and extremely robust. The body is made of high quality, impact resistant and flame retardant plastic.


The lamp head was reinforced with a massive aluminum ring. A wide solid rubber ring protects the lens from possible damage.
 

As a result, the mobile light can also be used under extreme conditions.

 

 

 Emergency light function – safety in case of power failure                         


  
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



If the Hand Lamp SH-5.300 is in the charging cradle while the power supply fails, it will switch on automatically because of the integrated emergency lighting function. This is on condition that the charging cradle is connected to the power supply and the lamp is switched on in the desired mode.

In the event of a power failure, the battery light becomes a reliable light source, e.g. in public buildings, manufacturing plants, production sites and workplaces, in medical facilities, meeting places, hotels, restaurants, underground garages or in the private sector.

 

 

 Wall/Car Mount available as an accessory                        

 

        
 


Well kept on the wall or always at hand in the vehicle – with the high-quality wall and car mount SH-5.931 the LED Hand Lamp SH-5.300 is always safely stowed away.

If the lamp serves as emergency and safety lighting, e.g. in private, commercial or public buildings, the SH-5.931 commends itself as an ideal wall mount. By means of the locking screw, the charging cradle is fixed on the holder, the lamp is securely locked in the bracket by means of the deep-drawn snap of the fixing clip.

Wall/Car Mount SH-5.931 
To the product >

 

 

 Setup and features of the hand lamp

 

 

Features:

•  Rubber lens protector
•  3 W high-performance LED from Cree
•  128° swivelable lamp head
• 
Robust housing made of shock-resistant,
   flame-retardant plastic with IP 54

•  High-performance Li-ion battery 7.4 V, 2,200 mAh
   Runtime: 4.5 h at full, 9 h at half luminosity
•  Big, rubber-coated push-button switch:
   ON/OFF, luminosity: 100 % / 50 %
•  Optical charging status indicators
•  Magnet, integrated in the lamp base



Rear:
•  Mounting clip made of metal for attachment
   to equipment or clothing and for securely fixing
   the lamp in the wall mount



Included accessories:
•  Charging cradle with charge control indicator
•  230 V plug-in power unit
•  12/24 V car charging adapter

 

 

 3 year manufacturer warranty                               

 

  IVT and Staudte Hirsch products are manufactured following a high quality standard and strict quality guidelines. We are so convinced of the longevity of our products that we add another year to the statutory manufacturer warranty free of charge.

 

 

 Delivery content                               

 
• LED Hand Lamp SH-5.300  
• Charging Cradle
• Plug-in power unit
• Car charging adapter 
• Instruction manual DE, GB, FR, NL, ES, IT

Please note: The accessories can also be ordered separately. 

 

 




 

       

Technical data

    

LED Hand lamp SH-5.300, 3 W, 225 lm  

 

Current supply

  Li-ion battery | 7.4 V | 2,200 mAh  
Light source   1 x Cree LED  
Power consumption (max.)   3 W  
Luminous flux (max.)   225 lm  
Efficiency    75 lm/W  
Color temperature   6,500 K | daylight white  

Working life LED

 

50,000 h

 
Lighting modes   1: Brightness level 100 %
2: Brightness level   50 %
 
Lighting range (max.)   150 m  
Operation time (max.)   9 h  
Beam angle   15° (Focus light)  
Inclination of lamp head   128° (60° forwards, 68° backwards)  
Emergency light function   yes  
Charging adapter   Plug-in power unit (100 - 240 V AC, 50/60 Hz)
Car charging adapter (12/24 V DC)
 
Charging time approx.   5 h  
Deep discharge protection   yes  
Overcharge protection    yes  
Protection class   lll  
Type of protection   IP 54  
Temperature range   -10 °C to +50 °C  
Material    ABS, PC, TPE plastic, aluminium  
Color   black, red, silver   
Dimensions (L x W x H)    70 x 47 x 176 mm (lamp) 
83 x 75 x   47 mm (charging cradle)
 
Weight   276 g (lamp) 
  83 g (charging cradle)
 
       




  

Downloads:

 

 

 

 

 

Instruction manual
LED Hand Lamp
SH-5.300, 3 W, 225 lm

 
   
 Download PDF Version »    
     

 

 

  

 

Recommended products:

Wall/Car Mount Staudte Hirsch SH-5.931

Wall/Car Mount Staudte Hirsch SH-5.931


• Suitable for Staudte Hirsch LED Hand Lamp SH-5.300
• Compatible with Charging Cradle SH-5.930
• For mounting to walls and in vehicles
• Made of high-quality metal, unobtrusive, extremely sturdy
• Locking screw for toolless attachment to charging cradle
• Quick attachment/removal of the lamp thanks to snap lock


 

Art.Nr.: 559061

15,70 EUR (19 % VAT incl.)

Charging Cradle Staudte Hirsch SH-5.930

Charging Cradle Staudte Hirsch SH-5.930

• Replacement charging cradle
• Suitable for LED Hand Lamp SH-5.300
• With charge control indicator


 

Art.Nr.: 559062

20,79 EUR (19 % VAT incl.)

Plug-in power unit SH-5.904 for charger cradle SH-5.900

Plug-in power unit SH-5.904 for charger cradle SH-5.900


• Replacement power supply
• Suitable for Charging Tray SH-5.900
• Suitable for LED Work Lamp SH-5.100
• Suitable for LED Portable Lamp SH-5.200
• Suitable for LED Hand Lamp SH-5.300
• Suitable for IVT LED Work Lamp PL-828
• Suitable for IVT LED Work Lamp PL-852

 

Art.Nr.: 559050

15,69 EUR (19 % VAT incl.)

Car charging adapter 12 V/24 V Staudte Hirsch, SH-5.903

Car charging adapter 12 V/24 V Staudte Hirsch, SH-5.903


• 12 V/24 V car charging adapter
• Suitable for Staudte Hirsch lamps:
   SH-5.100, SH-5.200 and SH-5.300
• Suitable for IVT lamps:
   PL-850 3 W, PL-830 and PL-828
• Protects against overcharging
 

Art.Nr.: 559030

14,89 EUR (19 % VAT incl.)

Li-ion battery 7.4 V, 2.2 Ah for SH-5.300, PL-830, PL-828

Li-ion battery 7.4 V, 2.2 Ah for SH-5.300, PL-830, PL-828



• Replacement battery for lamp models
  SH-5.300, PL-830, PL-828
• Powerful Li-Ion battery 7.4 V, 2.2 Ah
• Allows a large number of charging cycles
• Easy exchange
• Maintenance free



 

Art.Nr.: 559190

23,55 EUR (19 % VAT incl.)

Zur Kenntnis genommen

Diese Webseite verwendet Cookies. Durch den Besuch dieser Webseite stimmen Sie der Nutzung von Cookies zu. Mehr erfahren