MOLL Spezial Li Battery 12.8 V, 60 Ah with Bluetooth communication interface

MOLL Spezial Li Battery 12.8 V, 60 Ah with Bluetooth communication interface

Zoom image
Important characteristics and features:


New product

• High discharge currents
• Longer cycle life
• Weight saving
• Low self-discharge
• Bluetooth/App data interface
 

556,72 EUR

VAT excl.

Product no.: 920017


Recommended application:
 




Modern energy supply - the ideal battery for your vehicle

The usable capacity of lithium batteries (100 %) is unbeaten and twice as high compared to lead batteries (50 %). A 12 V, 120 Ah lead battery can be equivalently replaced by a 12 V, 60 Ah lithium batterie without having to accept losses in usable energy.

In combination with the considerably lower weight of a lithium battery, 75 % weight can be effectively saved whilst the usable capacity remains unchanged.

Even if high currents are discharged, which may occur when demanding electrical consumers, such as coffee machines, hairdryers, flex and compressor are used, a lithium batterie supplie consistent capacity on a stable voltage level at the same time.

A further benefit is its extremely long cycle life (2.500 at 80 % depth of discharge, 3.000 at 70 % depth of discharge, 5.000 at 50 % depth of discharge), which exceeds the cycle life of conventional lead batteries (up to 550 cycles at 50 % depth of discharge) many times over. In contrast to lead batteries, cyclic deep discharges and longer deep-discharged rest periods have no notable impact on the cycling performance of our battery.

In addition to its very low selfdischarge, a selfsufficient energy supply over a longer period can therefore be ensured.

Important NOTE!

All MOLL special Li batteries are equipped with a BMS (Battery Management System)
this monitors all important parameters of the LiFePO₄ battery: e.g. voltage, current, temperature, charging cycles, etc.

The BMS ensures that the battery is protected from any incorrect handling.

It disconnects the battery at overvoltage, undervoltage or if the current draw is too high and automatically switch on again as soon as the
problem has been resolved.

In particular, the maximum output current is an important physical parameter for protecting the battery. 

The MOLL special Li battery 12.8 V / 100 Ah is suitable for the operation of following inverters:

• Digital sine wave inverter DSW 300 W / 12 V
• Digital sine wave inverter DSW 600 W / 12 V
• Digital sine wave inverter DSW 1200 W / 12 V

• Sine wave inverter SW 100 W / 12 V
• Sine wave inverter SW 150 W / 12 V
• Sine wave inverter SW 300 W / 12 V
• Sine wave inverter SW 600 W / 12 V
• Sine wave inverter SW 1200 W / 12 V


Recommended use:

Ideal for use in construction machines, trucks, travel coaches, boats in craft vehicles as well as in mobile homes and caravans, also in connection with solar systems or wind power.

Delivery content:

• MOLL sezial Li Battery 12.8 V, 60 Ah





Main features:

 

  High discharge currents


The MOLL special Li battery is particularly suitable for high discharge currents: continuously 100 A, max. 200 (3s) 500 A (30s), without notable loss of capacity. During the whole discharge process the voltage remains on a stable level.

 

  Longer cycle life         


Even at 100 % depth of discharge, lithium-ion batteries have, in comparison to lead batteries, a much longer cycle life.

 

  Weight saving        


The MOLL special Li battery weighs about half as much as a lead battery with equivalent nominal capacity. Since its usable capacity is twice as much as a lead battery's capacity, the total weight reduction amounts to 75 % whilst the usable energy remains unchanged.

 

  Low self-discharge        


Due to lower self-discharge, lithium-ion batteries can be stored much longer than lead batteries without any need for recharge.

 

  Integrated battery management system (BMS)        


Highest degree of safety:

The integrated battery management system (BMS) monitors all cell parameters (current, voltage, temperature) and ensures the highest degree of safety as well as an effective protection against overcharging and deep discharge. In case of a malfunction, the BMS interrupts the electrical connection to respective consumer or charger.


       

Technical data

    

MOLL spezial Li 12.8 V, 60 Ah

 
Battery type   LiFePO₄ (Lithium Iron Phosphate)  
Nominal voltage   12.8 V  
Nominal capacity   60 Ah  
Energy   768 Wh  
Charging voltage     14.4  
Final discharge voltage   10.0 V  
Operating temperature   Discharge     -20 to +55 °C
Charge          0 to +55 °C
Storage        -20 to +45 °C
 
Discharge current    continuously 100 A
max. 200 A (3s) 500 A (30ms)
 
Charging current   recommended 12 A
max. 60 A
 
BMS included   yes  
Data interface   Bluetooth  
Data output   Voltage, SOC, Current, Temperature  
Protection type   IP 55  
Terminal type   DIN  
Cycle   2.500 at 80% depth of discharge
3.000 at 70% depth of discharge
5.000 at 50% depth of discharge

 
 
Dimensions (L x W X H)   242 x 175 x 190 mm  
Weight   6.3 kg  
       

 

   

Downloads:

 


 


 


 


 

User manual
MOLL spezial Li
12.8 V, 60 Ah

Complete brochure
MOLL spezial Li
12.8 V, 60 Ah

 

 

Download PDF Version » Download PDF Version »    
       


Recommended products:

Digital Sinusoidal AC Inverter DSW-300, 12 V, 300 W

Digital Sinusoidal AC Inverter DSW-300, 12 V, 300 W

 

• Real sinusoidal alternating current 230 V/50 Hz
• High peak output power 600 W
• Galvanic isolation
• Standby and sleep function
• Dynamic deep discharge protection
• Power start function for loads with high start-up current
• Power and temperature-controlled fan
• Over-voltage switch-off
• Country-specific power plug adapter available on request


 

Art.Nr.: 430101

250,42 EUR (19 % VAT excl.)

Digital Sine Wave Inverter DSW-600, 12 V, 600 W

Digital Sine Wave Inverter DSW-600, 12 V, 600 W

 

  • Input voltage: 12 V or 24 V DC
  • Double as high peak output power
  • Galvanic isolation of the inputand output stages
  • Energy-saving standby function
  • Dynamic deep discharge protection
  • Power start function
  • 5 V USB terminal
  • Temperature range -25 °C to +60 °C
  • Sturdy metal housing

 

Art.Nr.: 430103

334,45 EUR (19 % VAT excl.)

Digital Sine Wave Inverter DSW-1200, 12 V, 1200 W

Digital Sine Wave Inverter DSW-1200, 12 V, 1200 W

 

  • Input voltage: 12 V or 24 V DC
  • Double as high peak output power
  • Galvanic isolation of the inputand output stages
  • Energy-saving standby function
  • Dynamic deep discharge protection
  • Power start function
  • 5 V USB terminal
  • Temperature range -25 °C to +60 °C
  • Sturdy metal housing

 

Art.Nr.: 430105

468,91 EUR (19 % VAT excl.)

Sinus Inverter SW-100/12 V

Sinus Inverter SW-100/12 V


• Continuous output rating 100 VA
• Peak output rating 200 VA
• Output voltage AC (+5/-8 %) 230 V

Art.Nr.: 430012

82,35 EUR (19 % VAT excl.)

Sinus Inverter SW-150/12 V

Sinus Inverter SW-150/12 V


• Continuous output rating 150 VA
• Peak output rating 300 VA
• Output voltage AC (+5/-8 %) 230 V

Art.Nr.: 430000

125,88 EUR (19 % VAT excl.)

Sinus Inverter SW-300/12 V

Sinus Inverter SW-300/12 V


• Continuous output rating 300 VA
• Peak output rating 600 VA
• Output voltage AC (+5/-8 %) 230 V

Art.Nr.: 430002

162,84 EUR (19 % VAT excl.)

Sinus Inverter SW-600/12 V

Sinus Inverter SW-600/12 V


• Continuous output rating 600 VA
• Peak output rating 1200 VA
• Output voltage AC (+5/-8 %) 230 V


 

Art.Nr.: 430004

267,23 EUR (19 % VAT excl.)

Sinus Inverter SW-1200/12 V

Sinus Inverter SW-1200/12 V


• Continuous output rating 1200 VA
• Peak output rating 1800 VA
• Output voltage AC (+5/-8 %) 230 V

 

 

Art.Nr.: 430006

360,50 EUR (19 % VAT excl.)

MPPT<i>plus</i><sup>+</sup> solar controller 10 A

MPPTplus+ solar controller 10 A

 

• Suitable for lead and LiFePO4 batteries
• Automatic voltage recognition 12 V/24 V
• MPPT: highly efficient, fast, battery-preserving
• Suitable for all common solar modules
• Solar input voltage max. 70 V
• Microprocessor-controlled charging
• High efficiency grade max. 97 %
• Low internal current consumption
• Standby function
• Individualized configuration via remote control or PC

 

 

Art.Nr.: 200035

156,44 EUR (19 % VAT excl.)

MPPT<i>plus</i><sup>+</sup> solar controller 20 A

MPPTplus+ solar controller 20 A

 

• Suitable for lead and LiFePO4 batteries
• Automatic voltage recognition 12 V/24 V
• MPPT: highly efficient, fast, battery-preserving
• Suitable for all common solar modules
• Solar input voltage max. 70 V
• Microprocessor-controlled charging
• High efficiency grade max. 97 %
• Low internal current consumption
• Standby function
• Individualized configuration via remote control or PC

 

Art.Nr.: 200036

200,14 EUR (19 % VAT excl.)

MPPT<i>plus</i><sup>+</sup> solar controller 30 A

MPPTplus+ solar controller 30 A

 

• Suitable for lead and LiFePO4 batteries
• Automatic voltage recognition 12 V/24 V
• MPPT: highly efficient, fast, battery-preserving
• Suitable for all common solar modules
• Solar input voltage max. 70 V
• Microprocessor-controlled charging
• High efficiency grade max. 97 %
• Low internal current consumption
• Standby function
• Individualized configuration via remote control or PC

 

Art.Nr.: 200037

242,95 EUR (19 % VAT excl.)

MPPT-Solar-Controller 12 V/24 V, 10 A

MPPT-Solar-Controller 12 V/24 V, 10 A

 

  • MPPT charging mode
  • Automatic voltage recognition 12 V/24 V
  • Standby function
  • Step-up function
  • Microprocessor-controlled charging
  • Multi-step charging mode
  • Suitable for lead batteries (acid, gel)
  • Automatic temperature compensation
  • External temperature sensor

 

Art.Nr.: 200026

120,61 EUR (19 % VAT excl.)

MPPT-Solar-Controller 12 V/24 V, 20 A

MPPT-Solar-Controller 12 V/24 V, 20 A

 

  • MPPT charging mode
  • Automatic voltage recognition 12 V/24 V
  • Standby function
  • Step-up function
  • Microprocessor-controlled charging
  • Multi-step charging mode
  • Suitable for lead batteries (acid, gel)
  • Automatic temperature compensation
  • External temperature sensor

 

Art.Nr.: 200027

130,92 EUR (19 % VAT excl.)

MPPT-Solar-Controller 12 V/24 V, 30 A

MPPT-Solar-Controller 12 V/24 V, 30 A

 

  • MPPT charging mode
  • Automatic voltage recognition 12 V/24 V
  • Standby function
  • Step-up function
  • Microprocessor-controlled charging
  • Multi-step charging mode
  • Suitable for lead batteries (acid, gel)
  • Automatic temperature compensation
  • External temperature sensor

 

Art.Nr.: 200028

155,56 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCplus 12 V/24 V, 15 A

SOLAR-CONTROLLER SCplus 12 V/24 V, 15 A

 

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process

 

Art.Nr.: 200038

77,81 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCplus 12 V/24 V, 25 A

SOLAR-CONTROLLER SCplus 12 V/24 V, 25 A

 

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process

 

Art.Nr.: 200039

84,82 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCplus 12 V/24 V, 40 A

SOLAR-CONTROLLER SCplus 12 V/24 V, 40 A

  

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process

 

 

Art.Nr.: 200040

94,34 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCDplus 12 V/24 V, 15 A with display

SOLAR-CONTROLLER SCDplus 12 V/24 V, 15 A with display

 

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process

 

 

Art.Nr.: 200041

94,34 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCDplus 12 V/24 V, 25 A with display

SOLAR-CONTROLLER SCDplus 12 V/24 V, 25 A with display

 

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process

 

Art.Nr.: 200042

103,00 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCDplus 12 V/24 V, 40 A with display

SOLAR-CONTROLLER SCDplus 12 V/24 V, 40 A with display

 

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process
     

Art.Nr.: 200043

111,66 EUR (19 % VAT excl.)

SOLAR-CONTROLLER SCDplus 48 V, 40 A with display

SOLAR-CONTROLLER SCDplus 48 V, 40 A with display

 

  • Serial solar controllers: precise, battery-preserving charging
  • Pulse-width-modulated charging mode (PWM)
  • Predefined charging characteristics
  • Switchable load output (on/off)
  • Timer function
  • Night light function
  • Standby function < 10 mA internal current consumption
  • Microprocessor controlled charging
  • Multi-step charging process
     

Art.Nr.: 200044

125,50 EUR (19 % VAT excl.)

Solar charge controller 12 V/4 A

Solar charge controller 12 V/4 A

 

  • Serial charge controller
  • Suitable for 12 V solar systems
  • Suitable for lead-acid and lead-gel batteries
  • PWM charging method
  • Gentle battery charging
  • Low internal current consumption 2.5 mA
  • With overcharging protection
  • With non-return valve
  • LED battery status indicator

 

Art.Nr.: 200007

13,59 EUR (19 % VAT excl.)

Solar Controller 12 V/24 V, 4 A with deep discharge protection

Solar Controller 12 V/24 V, 4 A with deep discharge protection

 

  • Serial charge controller
  • Suitable for 12 V- and 24 V solar systems
  • Suitable for lead-acid and lead-gel batteries
  • PWM charging method
  • Gentle battery charging
  • Low internal current consumption 3 mA
  • With deep discharge and overcharging protection
  • With non-return valve
  • 12 V/24 V DC load output

 

Art.Nr.: 200013

22,68 EUR (19 % VAT excl.)

Zur Kenntnis genommen

Diese Webseite verwendet Cookies. Durch den Besuch dieser Webseite stimmen Sie der Nutzung von Cookies zu. Mehr erfahren