Deutsch English

Solar-Sets

 

Construction of an isle system with direct current and alternating
current consumers
An isle system for the independent supply with solar energy normally
consists of the following components:

1. One (more) solar panel (s)
2. One solar charger (controller)
3. One (more) solar battery (ies)
4. Direct current consumers (e.g. 12 VDC LED light)
5. One inverter, if alternating current (AC) is needed
6. Alternating current consumers (e.g. 230 VAC light, TV set)

The solar panel (1) will be connected to the solar charger (2). The two cables (±)
should be well dimensioned, in ordered to avoid power losses.
The solar charger (2) will be connected to the solar battery (3) and eventually with the DC
electrical consumers (4). The solar charger should be dimensioned at least 10 % higher
than the maximum current of the solar panels.
The battery cables and the cables to the consumers should always contain a fuse.
The inverter (5) will always be connected to the battery (3), never directly to the solar charger (2),
as otherwise the solar charger could be damaged. This cable should also contain a fuse.
To the inverter the 230 VAC electrical consumers may be connected. The safety regulations
for electrical installations must be observed during installation.

With this isle systems you can build your individual energy source which you can use
anywhere. All systems are fully functional after 3–7 days of charging time.
The solar batteries should be located in an enclosed and dry room.



MPPTplus+ solar controller

Experience the individuality of your solar system!

With the new devices of the MPPTplus+ Series this must not remain an utopic dream.
You can choose your battery type via DIP-switch, (Gel, AGM, LiFePO4) always read the most
recent operation parameters or turn the MPPT function on/off.
With the optional accessories, Touch-Screen FB and Webbox you can achieve further
adjustments of your solar system. For example you may customize the cut-off voltage,
the value of the deep-discharge protection or the temperature compensation. Further it is possible
to save your operation data on conventional memory cards and evaluate it on your PC.
Data and settings from the Webbox may be displayed and modified via smartphone and PC.



MPPT<i>plus</i><sup>+</sup> solar controller 10 A

MPPTplus+ solar controller 10 A

 

  • MPPT charging characteristic: highly efficient, fast, battery-preserving
  • Microprocessor-controlled charging
  • Multi-step charging, adapted to the respective battery type
  • Suitable for all common solar modules
  • Selection of the battery type by DIP switch
  • Low internal current consumption
  • Standby function
  • Individualized configuration via remote control or PC
  • Automatic temperature compensation

 

Art.Nr.: 200035

150,42 EUR

19 % VAT excl.

Details

MPPT<i>plus</i><sup>+</sup> solar controller 20 A

MPPTplus+ solar controller 20 A

 

  • MPPT charging characteristic: highly efficient, fast, battery-preserving
  • Microprocessor-controlled charging
  • Multi-step charging, adapted to the respective battery type
  • Suitable for all common solar modules
  • Selection of the battery type by DIP switch
  • Low internal current consumption
  • Standby function
  • Individualized configuration via remote control or PC
  • Automatic temperature compensation

 

Art.Nr.: 200036

192,44 EUR

19 % VAT excl.

Details

MPPT<i>plus</i><sup>+</sup> solar controller 30 A

MPPTplus+ solar controller 30 A

 

  • MPPT charging characteristic: highly efficient, fast, battery-preserving
  • Microprocessor-controlled charging
  • Multi-step charging, adapted to the respective battery type
  • Suitable for all common solar modules
  • Selection of the battery type by DIP switch
  • Low internal current consumption
  • Standby function
  • Individualized configuration via remote control or PC
  • Automatic temperature compensation

 

Art.Nr.: 200037

225,21 EUR

19 % VAT excl.

Details

Show 1 to 3 (of in total 3 products) Sites:  1