06 For an optimum and reliable function please use only original IVT accessories MPPTplus Solar Controller Series Recommended application for the high quality MPPTplus Solar Controller MPPTplus Solar Controllers are perfectly suitable for solar systems in which the panel voltage is significantly higher than the battery voltage With the use of an MPPTplus Solar Controller 30 of the solar panel surface can be saved in order to achieve a comparable power exploitation as with common solar chargers Specifically in northern latitudes where despite solar radiation the temperature of the solar module remains low the MPPTplus Solar Controllers make the most out of your solar system s power The solar controllers of the MPPTplus series are equipped with an intelligent charging technology anlong with many reasonable technical details The most important are Automatic recognition of the system voltage The MPPTplus Solar Controllers are suitable for operation within 12 V and 24 V solar systems They recognize independently whether a 12 V or a 24 V system is connected The system voltage may be selected manually by means of the DIP switch Selectable battery type The solar controllers are perfectly adapted to charge all types of lead batteries acid gel AGM and LiFePO4 batteries An optimum tuning of the charging characteristics to the different battery types is made possible by the DIP switch Automatic temperature compensation During the charging process the temperature is measured by the external temperature sensor and this allows the dynamic adjustment of the cut off voltage to the given temperature conditions At high temperatures the cut off voltage will be reduced overcharging and unnecessary gassing is prevented At low temperatures the cut off voltage is increased and with this the batteries are recharged optimally Standby function The standby function can be activated or deactivated respectively by using the DIP switch In the case of insufficient solar voltage the solar controller enters the standby mode if activated Thus the internal current consumption of the MPPTplus controller is reduced by up to 80 the connected battery preserved and unnecessary discharging prevented As soon as sufficient voltage is applied the solar controller automatically returns from the standby mode Switchable load output The load output may be manually switched on or off by means of push button 1 2 USB sockets for external remote control FB 04 FB 05 or Webbox LCD 2 DIP switch for selecting the functions 3 Manual confirmation of the chosen battery type 4 On off switch for load output 5 Socket for external temperature sensor 6 Robust metal housing with ventilation slots 1 2 4 5 6 3

Hinweis: Dies ist eine maschinenlesbare No-Flash Ansicht.
Klicken Sie hier um zur Online-Version zu gelangen.